NEW 2026 York 40 ton Coated Coils air cooled chiller YLAA-0041HJ17PC R-454b 208V In-Stock

Stock can change daily please check with us on availability! KIG, (Keith Industrial Group Inc.) specializes in quality NEW Air-Cooled Chillers for industries such as breweries, wineries, manufacturing, plating, plastics, comfort cooling. We provide hundreds of units per year from 5 tons up to 350 tons.

Availability Status of this YORK YLAA-0041HJ17PC "39 ton" chiller:

• As of 10-20-26 there is 1 of this model in stock

NOTE: This chiller has the upgraded epoxy coated condenser coils (designated by PC in model number) which are ideal for coastal environments or corrosive environments (e.g.: refineries, etc.). Pricing reflects this upgrade.  The same model chiller is available without this option at a reduced cost (designated by VSD in model number). Please see our other listings.  

A start up visit charge must be added to the total and is required to honor 1 year parts and labor warranty. The start up charge can range from $ 2,300 up to $ 4,500 depending on the address and zip code of the site location.

•  ** This listing is for 208 volt 3 phase power.
• Freight is INCLUDED
• YLAA-0041HJ17PC Variable Speed Drive on ALL Condenser fans Low Sound Fans
• 39 tons of cooling capacity at nominal conditions
• R-454B Refrigerant (Fully Charged)
• EER [Btu/W.h] 11.85
• IPLV.IP [Btu/W.h] 18.62
• 2 refrigerant circuits
• 4 scroll compressors (2 per circuit)
• Voltage Code - (208/3/60) MCA 182 amp / Max fuse 200 - Maximum Allowable Incoming voltage is 220 volts
• SP NF Disconnect Switch w/Lockable Handle
• Control Transformer Both Low/High Ambient Kit
• Brazed Plate Exchanger Min Cooler flow: 41 gpm / Max Cooler Flow: 224 gpm... IDEAL flow through chiller: 93 gpm
• English cUL/cETL Listing
• Service Isolation Valves
• Hot Gas Bypass (1 circuit)
• Flow Switch and Y Strainer
• ASME Pressure Vessel & Associated Codes
• Louver Enclosure Panels
• Sound Kit Low Sound Fans
• Neoprene Isolators 89" wide x 102" long x 95" tall x 3805 lbs weight

Keith Industrial Group, Inc. (KIG) 104 Sterling St. Clinton, MA 01510